Week 2: Cutting the Eventide Corset out

Now, after a week of taking it easy it’s time to get stitching your Eventide Corset!

After having made any adaptations to fit on the Pattern, you’ll need to cut out the Fabric. Diagrams and more information can be found in the Eventide Instruction Book however; here are a couple of hints… … and dire warnings!

cut1 cut2

After having traced off, adapted and cut out the Pattern, pin to the Fabric remembering to measure the Grain Line. Fold the Coutil in half, Selvedge to Selvedge and Right Sides Together (so you are pinning to the back of your Fabric), and lay it on a flat surface.

It is incredibly important that each piece of the Pattern is cut out ON GRAIN. The Grain runs parallel to the Selvedge, which is the woven, finished edge of the Fabric. Cross Grain, or Bias, runs at a 45 degree angle to the straight Grain. Corsets must be cut out DIRECTLY ON THE STRAIGHT GRAIN to ensure the Waist Line in particular maintains the strength provided by the Straight Grain. Cutting the pieces of the Corset even slightly ‘off grain’ will mean it will twist uncomfortably as you wear it.

cut3 cut4

Now, dire warnings aside!, after you have pinned each Pattern piece you will need to draw on your Seam Allowance… which is 1.5cm.

To do this, use a Tape Measure to measure out 1.5cm from the Pattern piece, and mark with some Tailors Chalk or a Fabric Pencil in a contrast colour. As you can see, Tailors Chalk is available in a variety of colours and it is useful to have a selection. Continue around each Pattern piece, measuring out and making a mark every few centimetres or so. Use a ruler or Patternmaster to connect the dots.

cut5 cut6 cut7

Cut each piece out, and before you un-pin it, make a little snip no more then 1cm deep at the Waist Line. This is called a notch and will assist you in sewing the Corset up. It is another important little detail!

Repeat for the Coutil.

cutting diagram

You may have noticed that each piece looks similar to the next, and you can choose to cut out some paper markers to Pin on to each piece. To do this simply write what the piece is on a little scrap of paper and pin to the piece BUT pin to the piece as you would WEAR it. To do this, lay the pieces out upside down so the top is closest to you.

And that’s it!

Don’t forget, the Eventide Corset Pattern is available in a number of options including Instant Download here, and you can join in with Corset Month on FacebookTwitter (#corsetsessions) and Pinterest!

Happy stitching!

One thought on “Week 2: Cutting the Eventide Corset out

  1. Pingback: Week III: Sewing the Eventide Corset up | Laura After Midnight

Leave a Reply

Your email address will not be published. Required fields are marked *