Great British Sewing Bee: Week 3

SEWING BEE2

Well, what did we all think about week 3? Poor Julie, I shall definitely miss her. She brought a wonderful normality to the Bee!! Click the above lick to watch…

This week the Sewers tackled Leggings, T-Shirt Up-Cycles and sewing Jersey dresses. Which was all a bit the same really, and I found myself zoning out a little to be honest! Probably because I sew a lot of Historical Costumes I don’t sew much stretch, don’t worry though, I have tracked down some helpful links and tips for you and some even more helpful tips if you don’t own  an Over Locker/Serger if you’d like to work with stretch fabrics.

First things first. I find that when tackling a new fabric or technique it is important for me to be stitching up something I really like, or want! I’ve been on the hunt, and there are some lovely patterns out there from some great Independent Pattern Companies which should get anyone excited about sewing with stretch.

stretch patterns

From left: Sewaholics Pendrell Blouse, Jamie Christina’s Mission Maxi and IN-HOUSE’s Kimono Tee.

For help stitching up the above, you should really check out The Thrifty Stitcher for some greatTutorials for using stretch fabrics. The Burda Style Blog is also worth checking out for a great no nonsense tips for Sewing Stretch Fabric without an Overlocker video tutorial. The Papercut Collective also have a some Knit tips, and and article about sewing with Knits without an overlocker.

As with anything, take your time and stitch up some samples to get used to your fabric if this is your first time working with Jersey. In my experience, each and every Jersey fabric is different and contains its own unique properties and samples will help you understand and manage it to the best of your abilities. A super neat trick to remember: if you like it and your garment sews together well, buy more Knit fabric in a different colour and make the same thing again! This applies to most things to be honest however; Knits are easy to wear and a little more versatile than some styles.

That’s about it, told ya I zoned out didn’t I?! If you would still like a bit more help Sewaholic has put together this exhaustive list of many varied Tutorials on the subject! Hurrah!!

Happy stitching!

How To: Etsy’s Sew Your Own Leggings

I don’t often re-blog things (having had some super nasty comments from the owners of the original post despite following all the rules!) however; this was just so dazzlingly, fabulously, wonderful that I had to share it! Especially because it’s Pattern Month. I also know that many of you aren’t Etsyians and maybe don’t get their emails with tutorials, helpful advice and general news in them so here goes…

Etsy’s How-Tuesday: Design and Sew your Own Leggings 

Etsy.com handmade and vintage goods

See the original post here, or click any of the pictures to be taken to the original post too.

This post was written for Etsy by Cal Patch. Check out her Blog here

I adore leggings. I live in leggings. I always wish I had more leggings: colored ones, printed ones, stripey ones, long cozy woolly ones in winter, and shorter lightweight cotton ones in summer. I wear  them under dresses or tunics, I wear them to the gym, I lounge and sleep in them. As a clothing designer, I’m glad I can make my own, because when I look around I don’t see nearly enough options out there in fun colors, prints, and natural fibers. Today I’m going to show you that you can make your own leggings, too!

You’ll need to measure yourself, draft a pattern, get some stretchy knit fabric, and stitch it up. This isn’t a difficult project, but I’m assuming you’re at least a competent beginner sewer. Let’s get started!

Materials You’ll Need:

For the pattern:

  • Paper to make the pattern. Get a pad or roll; bigger is better. (I like an 18 x 24” pad of drawing paper.)
  • Pencil and eraser
  • Scissors (for cutting paper)
  • Tape measure
  • Ruler (clear 18” x 2” sewing ruler is best)
  • Clear tape

For the leggings:

  • About 1 ½ yards of nice stretchy knit fabric, like cotton/Lycra jersey.
  • About 1 ½ yards of cheaper stretchy knit fabric, like cotton/Lycra jersey (for the muslin).
  • All-purpose thread to match.
  • Pins
  • Scissors (for fabric)
  • Sewing machine

You’ll need the following measurements:

  • Length
  • Half Waist (Waist divided by 2)*
  • Thigh Circumference*
  • Knee Circumference*
  • Ankle Circumference*
  • Front Rise Height
  • Back Rise Height
  • Distance from Thigh to Knee
  • Distance from Knee to Ankle

Okay, now let me explain how to go about measuring each one, as I’ve no doubt you might have a question or two! I’ll explain them as though you’re making the leggings for yourself, but you can make them to fit anyone, even kids. All of these measurements can be taken while holding the tape fairly snugly; you might want to wear something close-fitting (like a pair of leggings) as you measure. Actually, if you have a pair of leggings that fit well, putting them on will help you in determining some of these measurements that you may never have thought about before, such as where you’d like the waist to sit.

Length: This is really a design decision, but it will also relate to your body.  Hold the tape measure at your side, where you’d like the waist of the leggings to sit (anywhere from waist to hip), and drop it down to your ankle. A full-length mirror should help you see the measurement of your desired length. If in doubt, I recommend going an inch or two longer. You can always shorten!

Half Waist (divided by 2)*: Measure around your waist, at the point where you want the top of the leggings to sit (and where you measured your length from). If this is more like your hip, that’s fine! Just measure yourself there. Then divide this number by 2, for your half waist.

Thigh Circumference*: Measure around the full circumference of one thigh, at its highest point (just below the crotch).

Knee Circumference*: Measure around one knee.

Ankle Circumference*: Measure around one ankle, exactly where you want the leggings to end.

Front Rise Height: This might sound odd, but here’s the best way to get this measurement: Take your ruler and hold it between your legs, as high up as is comfortable.  Be sure the ruler is parallel to the floor. Now measure up from the ruler, in a straight line, to where you want the waistline of the leggings to rest. (Note: The rise seam will be curved, but for now you just want the height, which is a straight line, so don’t measure all the way from where the inseams intersect.)

Back Rise Height: Same as Front Rise, but in the back.

Distance from Thigh to Knee: Along your side, measure from the point where you took your thigh circumference down to where you took your knee circumference.

Distance from Knee to Ankle: Same, but from knee to ankle.

Now that you have all of your body measurements, we just need to do a tiny bit of math before we begin drafting the pattern. First though, we need to talk about an important concept in pattern making: ease. Ease is the difference in size between you and your clothes. In a woven fabric, the garment needs to be bigger than you in order for it to fit and be comfortable, because wovens generally don’t stretch. This is called positive ease. When working with knits, the garment might be bigger than you, or exactly the same, or even smaller, depending on the style. The latter is possible because knits stretch and mold to fit the body, and is called negative ease. Leggings are generally meant to cling snugly to the body, so you will want to incorporate a bit of negative ease. If you prefer a looser fit, you can skip this step.

You also need to decide on the type of knit to use. Different kinds of knits have vastly different amounts of stretch. 100% cotton sweatshirt fleece has very little stretch, while 90% cotton/10% Lycra jersey has lots of it. Lycra or Spandex (same thing, just different brands) give a fabric the ability to stretch and will also give it recovery, or the ability to return to its original shape after stretching. So if you’re not a fan of baggy knees, you might want to choose a knit with 5-10% of an elastic fiber added to it. My favorite fabrics to use for leggings are cotton/Lycra jersey or rib knits, and wool jersey or rib (with or without Lycra; wool has better recovery on its own than cotton does).

Assuming you’ll be using one of these types of knit, you can deduct 10% from each of the measurements with a * after them for negative ease. These are your four horizontal circumferences. If you are using a knit with less stretch, you might want to deduct only 5% or none at all. You will now use these adjusted numbers in place of the original measurements.

Next we need to figure out the depth of the rise seam. Take your Thigh Circumference (after deducting ease), and subtract from it your half-waist (also minus ease). Let’s call this D (for Depth). Multiply D by 1/3; this is your Front Rise Depth. Multiply D by 2/3; this is your Back Rise Depth. Write these down, you’ll need them in a little while.

So we’re ready to draft our pattern! It’ll be just one pattern piece (there’s no need for a side seam), from which you’ll cut two pieces (one for each leg) to make a pair of leggings.

This is what your pattern piece will look like after you follow the steps below.

Patternmaking Directions

1. To begin, you need to cut (or tape together) a piece of paper that measures at least 4” longer than your Length measurement, and at least 2” wider than your Thigh. Draw a vertical line down the center of the paper (or fold if it’s easier); all of your drafting will originate from this line. Imagine that this line will run down the side of your leg, where a side seam would be; this will be the center of the pattern, and I’ll refer to it as the Center Line (CL).

2. On CL, make a small mark about 2” down from the top edge of the paper. Then measure down the full Length measurement, and make another mark. At this mark, draw a line, perpendicular to CL, that measures your Ankle Circumference. Half of the measurement should extend from either side of CL.

3. From the Ankle, use your Knee to Ankle Height measurement to determine where to draw your Knee Circumference, also centered over CL. Draw the Knee line, perpendicular to CL.

4. Repeat this step, using your Thigh to Knee Height, to Draw the Thigh line. Connect the dots from Thigh to Knee to Ankle on each side. You will probably have a slight angle at the knee point; smooth it into a gentle curve.

5. Now let’s work on the rise seams. On the Thigh line, measure in from the right side your Front Rise Depth, and make a mark. From this mark, draw a line upward, measuring your Front Rise Height, perpendicular to the Thigh line. From the left side, measure in your Back Rise Depth, and mark. From here, draw a perpendicular line upward, measuring your Back Rise Height. Connect the Front and Back Rise points, starting out perpendicular from the top of the Front Rise line, and gently curving up to meet the Back Rise line. This is the Waist line. Next, slope the Back Rise by holding your ruler along the Waist line, at the top of the Back Rise, and drawing a perpendicular line which intersects the Thigh line. Draw curves to fill in the lower corners of the Front and Back Rise lines.

6. All that’s left is to add seam allowance. I use ½” seam allowance on all seams except for the bottom hems, where I add a full inch for hem allowance. Draw the seam allowance around all sides of the patterns, and cut it out. CL becomes your grainline, and you can label the pattern and write the cutting instructions of Cut 2.

Now you can make a muslin, or fit sample. Try to find a cheap fabric that has similar stretch to the real fabric you plan to use. All you really need to sew are the inseams and rise seams to test the fit and make corrections. Don’t bother finishing the waistband or hems since you may want to adjust them; just remember that you will lose a little height at the waist and length at the hem when you do finish these edges in the final garment. If you see anything you want to change or adjust, pin or mark with chalk on the muslin. If you need to add fabric, such as if you want to raise the waistline, just pin on a scrap to extend the edge to where you want it. Then be sure to correct your pattern accordingly. Every body is unique, so are likely to need a few tweaks to get the fit just right. If you only make slight adjustments, you can probably jump straight to your final fabric, but if you change the pattern drastically, I’d suggest making a second muslin.


How to Sew Your Leggings

When sewing knits, you need to use a stitch that will stretch as much as your knit does, or the seam will break. Test a few options on a swatch of the same fabric, until you find a stitch that works well. I recommend using either a stretch straight stitch, or a small (I like 1.5 x 1.5mm) zigzag stitch on your sewing machine (or a serger, if you happen to have one). Fold each piece upon itself, right sides together, along the inseams, pin and sew. You’ll now have two individual leg pieces.

The edges of most knits won’t unravel, so you don’t really need to finish the seam allowances, but you might want to trim them to ¼” and either zigzag over the edges, or sew a second stretchy seam right next to the first, in case any stitches do break. Turn one leg right side out and place it inside the other, matching up the front and back rise seams and pinning together. Sew the rise as one continuous curved seam front front to back. Finish as you did the inseams, if necessary.

Finishing the WaistbandThere are several ways you can finish the waistband. I usually use ½” elastic, cut to waist size, and seamed into a loop. Lay the elastic loop on the wrong side of the leggings waist, right at the top edge, pin and zigzag the edges together. Then turn the elastic down, so the waistline seam allowance covers it, and stitch again along the lower edge with a stretch straight stitch or a wide 3-step zig zag.

Another way is to make a folded waistband casing (with or without elastic inside) made from a separate piece of fabric. Cut the piece to your waist measurement (minus ease, plus 1” for seam allowance), by twice the desired casing width (plus 1” for seam allowance). With right sides together, sew the short seam. Sew the elastic into a loop if you’re using it, and fold the casing over it, wrong sides together. Pin the raw edges of the folded casing to the right side of the waist, and stitch around. Zigzag the three seam allowances together to finish.

To hem, turn the bottom edges under by ½”, then turn them again by another ½”, and pin. Sew with a stretch seam along the fold that is ½” from the edge.

How amazing is that? I know I have re-blogged the whole post but Cal just has some brilliant advice on things like sewing Knits and Ease (which is as important as she says it is!), and the Pattern info is especially relevant at the mo. See the original, full post here.

You can get some lovely Jersey and Knit fabrics from Etsy, below are just a couple of examples. If you don’t have an Etsy account you should! It’s like a stylish Ebay and all the sellers are independent small traders like me producing some truly amazing products like these Jersey Knits…

Organic Jersey fabric - Lillestoff - Peacock Love - 1/2 yard   Cotton Jersey Knit Stars - Pink - per Yard (59 x 36") 37677 - 227   Cotton Jersey Knit Cats per Yard (70 x 36") 34412

Grey on White Chevron Zig Zag Print Cotton Blend Jersey Knit Fabric-BTY-Presale-Gray Chevron   Cotton Knit Vintage Stars By the Yard 3400   Organic Jersey fabric - Lillestoff - Snowwhite Apple - 1/2 yard

Click on each picture above to be taken to the product to buy. I am loving the Chevrons and Blue Stars for some leggings!

Hope you have found this as interesting as I did, comments always welcome, and more so if you have tried making your own Leggings or have more helpful advice to impart. Remember to comment on this weeks Pattern Making Musings with Colette to win yourself some fabric, and look out for Fridays which is with Sinbad & Sailor, yay!

Happy patterning!